LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2011 >> Forte EX, 4D Hatchback, Automatic >> Repair and Diagnosis (Single Page) >> Electrical >> Gauges >> Indicators And Gauges >> Instrument Cluster >> Repair procedures >> Inspection >> Fuel Gauge Sender

Fuel Gauge Sender

  1. Using an ohmmeter, measure the resistance between terminals 1 and 3 of sender connector (A) at each float level.
    Fig 1: Measuring Resistance Between Terminals 1 & 3 Of Sender Using Ohmmeter
    G07369271Courtesy of KIA MOTORS AMERICA, INC.
  2. Also check that the resistance changes smoothly when the float is moved from "E" to "F".
    RESISTANCE REFERENCE CHART

    Position Resistance (Ω)
    E 184 ± 1Ω
    Warning lamp 170 ± 1Ω
    1/2 66 ± 1Ω
    Sender (F) 15 ± 1Ω
  3. If the height resistance is unsatisfied, replace the fuel sender as an assembly.
    CAUTION: After completing this test, wipe the sender dry and reinstall it in the fuel tank.
scientia non olet · About LEMON Manuals