Parking Brake Lever Stroke Adjustment
- Raise the vehicle, and make sure it is securely supported.
- Remove the floor console. Refer to FLOOR CONSOLE .
- Adjust the parking brake lever stroke by turning adjusting nut (A).
Parking brake lever stroke:
6~8 clicks (Pull the lever with 20kg)
NOTE: After repairing the parking brake shoe, adjust the brake shoe clearance, and then adjust the parking brake lever stroke. Refer to PARKING BRAKE SHOE INSTALLATION . - Release the parking brake lever fully, and check that parking brakes do not drag when the rear wheels are turned. Readjust if necessary.
- Make sure that the parking brakes are fully applied when the parking brake lever is pulled up fully.
- Install the floor console. Refer to FLOOR CONSOLE .