LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2011 >> Forte EX, 4D Hatchback, Automatic >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> Exterior Body Panels >> Hood >> Repair procedures >> Replacement >> Hood Latch Replacement

Hood Latch Replacement

  1. Remove the front bumper cover.
  2. Remove the hood latch (A) mounting bolts.

    Tightening torque: 

    6.9~10.8 N.m (0.7~1.1kgf.m, 5.1~8.0 lb-ft)

    Fig 1: Hood Latch & Mounting Bolts
    G07368724Courtesy of KIA MOTORS AMERICA, INC.
  3. Disconnect the hood latch cable (A) and remove the latch.
    Fig 2: Hood Latch Cable
    G07368725Courtesy of KIA MOTORS AMERICA, INC.
  4. Installation is the reverse of removal.
    NOTE:
    • Make sure the hood latch cable is connected properly.
    • Make sure the hood locks securely.
scientia non olet · About LEMON Manuals