LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2011 >> Forte EX, 4D Hatchback, Automatic >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Seats >> Seat & Power Seat >> Front Seat >> Repair procedures >> Replacement >> Passenger's

Repair procedures: Replacement: Passenger's

Fig 1: Seat Assembly Connectors (Passenger's)
G07368937Courtesy of KIA MOTORS AMERICA, INC.
  1. 3. Installation is the reverse of removal.
    CAUTION: SEAT MOUNTING BOLT INSTALLATION PROCEDURE (manual seat only)
    • Set the into the most rearward position. check then each slide is locked, and then tighten the front mounting bolt temporarily.
    • Set the seat into most forward position. check that each slide is locked, and then tighten the rear mounting bolt completely.
    • Set the seat into the most rearward position. check the front mounting bolt completely.
    • Check that the seat operates to and fro smoothy and the locking portion locks properly.
    NOTE:
    • Be sure to perform PODS re-zero with the GDS after replacing parts (Passenger's).
scientia non olet · About LEMON Manuals