Repair Procedures

Replacement

1. Remove the rear wheel & tire.

Tightening torque :
90 - 110 N.m (9.0 - 11.0 kgf.m, 65 - 80 lb-ft)


2. Remove the rear shock absorber from the frame by loosening the bolt.

Tightening torque :
100 - 120 N.m (10.0 - 12.0 kgf.m, 72 - 87 lb-ft)





3. Remove the rear shock absorber from the torsion beam axle by loosening the nut.

Tightening torque :
00 - 120 N.m (10.0 - 12.0 kgf.m, 72 - 87 lb-ft)





4. Installation is the reverse of removal.