Hazard Flasher Relay: Testing and Inspection

Inspection

Hazard Lamp Relay
Check for continuity between the terminals.
1. There should be continuity between the No.2 terminals in the I/P-F and No.5 or 6 terminals in the I/P-A when power and ground are connected to the No.2 terminals in the I/P-F and No.4 terminals in the I/P-A.
2. There should be no continuity between the No.2 terminals in the I/P-F and No.5 or 6 terminals in the I/P-A when power is disconnected.