Center Fascia Panel Replacement

Replacement

Center Fascia Panel Replacement
1. Put the SST (09840-1E100) into the space between the center fascia (A) and crash pad.

NOTE:
- Be care not to damage the center facia and crash pad.
- Put the SST into the area as indicated by the arrows.
- To prevent the scratch, apply protective tapes to the center fascia panel and its related parts.

2. Separate the center facia panel (A) from the crash pad by pulling the SST (09840-1E100).




3. Disconnect the connector (A).




4. Installation is the reverse the removal.