Trip Switch

Disconnect the negative (-) battery terminal.
Remove the cluster fascia panel and upper shroud (A) after disconnecting the connector (B). (Refer to the (For Coupe, refer to CRASH PAD . For Sedan, refer to CRASH PAD .)

Fig 1: Identifying Upper Shroud & Connector
Courtesy of KIA MOTORS AMERICA, INC.
Remove the trip switch (A) from the cluster fascia panel.

Fig 2: Identifying Trip Switch & Terminals
Courtesy of KIA MOTORS AMERICA, INC.
Check for continuity between the terminals in each switch position according to Fig 3.

Fig 3: Trip Switch Continuity Chart
Courtesy of KIA MOTORS AMERICA, INC.