LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2009 >> Spectra5 2.0 1, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Indicators And Gauges >> Repair Procedures >> Inspection >> Engine Coolant Temperature Gauge

Engine Coolant Temperature Gauge

  1. Disconnect the wiring connector (A) from the engine coolant temperature sender in the engine compartment.
  2. Turn the ignition switch ON. Check that the gauge needle indicates cool. Turn the ignition switch OFF.
  3. Connect a 12V, 3.4 watt test bulb between the harness side connector and ground.
  4. Turn the ignition switch ON.
  5. Verify that the test bulb flashes and that the indicator moves to HOT.

    If operation is not as specified, replace the engine coolant temperature gauge. Then recheck the system.

    Fig 1: Identifying Engine Coolant Temperature Gauge And Wiring Connector
    G06401110Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals