LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2009 >> Sedona Base >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Indicators And Gauges >> Instrument Cluster >> Replacement

Instrument Cluster: Replacement

  1. Disconnect the negative (-) battery terminal.
  2. Remove the cluster fascia panel (B) after removing 2 screws (A) and disconnecting trip switch connector.
    Fig 1: Identifying Cluster Fascia Panel
    G04884922Courtesy of KIA MOTORS AMERICA, INC.
  3. Pull out the cluster (A) from the housing after removing 4 screws.
    Fig 2: Identifying Cluster
    G04884923Courtesy of KIA MOTORS AMERICA, INC.
  4. Disconnect the cluster connector (A) and then remove the cluster.
    Fig 3: Identifying Cluster Connector
    G04884924Courtesy of KIA MOTORS AMERICA, INC.
  5. Installation is the reverse of removal.
scientia non olet · About LEMON Manuals