LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2009 >> Rio L4-1.6L >> Repair and Diagnosis >> Transmission and Drivetrain >> Clutch >> Clutch Hydraulic System >> Clutch Slave Cylinder >> Service and Repair >> Overhaul >> Reassembly

Reassembly










REASSEMBLY

1. Apply specified brake fluid to the release cylinder bore and the outer surface of the piston and piston cup, and push the piston cup assembly into the cylinder.

Specified fluid: Brake fluid DOT 3 or DOT 4


2. Install the valve plate(A), Spring(B), push rod(C) and boot(D).




scientia non olet · About LEMON Manuals