Component Inspection
- Check Thermostat.
- Check cooling system coolant level and fill if low.
- Check for a proper cooling system operation. Especially check that cooling and condenser fan operates normally.
- Remove the thermostat and check the following items:
- Stuck or damaged
- Verify the temperature at which the valve is open
: 80-84°C (176-183.2°F)
- Has a problem been found?
YES
- Substitute with a known-good Thermostat and check for proper operation. If the problem is corrected, replace Thermostat and go to "VERIFICATION OF VEHICLE REPAIR " procedure.
NO
- Go to "VERIFICATION OF VEHICLE REPAIR " procedure.