LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2008 >> Rio Base, Automatic >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Brake System >> Rear Disc Brake >> Inspection >> Rear Brake Disc Thickness Check >> Seize Of Rear Brake Disc

Seize Of Rear Brake Disc

  1. Remove the brake disc from hub using M8 screw (A) if the brake disc has been seized with the hub due to corrosion or overheat.
    NOTE: Be careful not to use the hammer. The disc can be damaged if you remove the disc from the hub by hammer.
    Fig 1: Identifying M8 Screw
    G04863210Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals