LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2008 >> Rio Base, Automatic >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Brake System >> Rear Disc Brake >> Inspection >> Rear Brake Disc Thickness Check >> Rear Brake Pad Check

Rear Brake Pad Check

  1. Check the pad wear. Measure the pad thickness and replace it, if it is less than the specified value.

    Pad thickness

    Standard value: 10.0 mm (0.39 in)

    Service limit: 2.0 mm (0.0787 in)

    Fig 1: Identifying Pad Thickness
    G04863184Courtesy of KIA MOTORS AMERICA, INC.
  2. Check that grease is applied, and the pad and backing metal for damage.
scientia non olet · About LEMON Manuals