LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2008 >> Rio Base, Automatic >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Seats >> Seat >> Seat Belt >> Replacement >> Front Seat Belt Replacement

Front Seat Belt Replacement

CAUTION:
  • When installing the belt, make sure not to damage the pretensioner.
  1. Remove the following items first.
  2. After raise the lower anchor cover (A), loosen the lower anchor mounting bolt (B).
    Fig 1: Lower Anchor Cover And Mounting Bolt With Torque Specifications
    G04863455Courtesy of KIA MOTORS AMERICA, INC.
  3. Remove the center pillar lower trim. See INTERIOR TRIM .
  4. Remove the center pillar upper trim. See INTERIOR TRIM .
  5. Remove the upper anchor (A).
  6. After disconnecting the pretensioner connector lock pin, remove the connector (B), Loosen the mounting bolt, then remove the pretensioner (C).
    Fig 2: Pretensioner And Mounting Bolt With Torque Specifications
    G04863456Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals