LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2008 >> Rio Base, Automatic >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Seats >> Seat Warmer >> Seat Warmer Switch >> Inspection

Seat Warmer Switch: Inspection

  1. Disconnect negative (-) battery terminal.
  2. Remove seat warmer switch from the floor console with a scraper.
    Fig 1: Seat Warmer Switch Terminal Identification
    G04863732Courtesy of KIA MOTORS AMERICA, INC.
  3. Check for continuity between the terminals in each switch position. See Fig 2.
    Fig 2: Testing Seat Warmer Switch
    G04863733Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals