LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2008 >> Rio Base, Automatic >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Interior/Illumination Lights >> Lighting System >> Turn / Hazard Lamps >> Inspection >> Hazard Lamp Relay

Hazard Lamp Relay

  1. Remove the negative (-) battery terminal.
  2. Remove the ICM relay box.
  3. Check for continuity between the terminals.
  4. There should be continuity between the No. 8 and No. 6 terminals when power and ground are connected to the No. 8 and No. 9 terminals.
  5. There should be no continuity between the No. 8 and No. 6 terminals when power is disconnected.
    Fig 1: Hazard Lamp Relay & Terminal Identification
    G04863614Courtesy of KIA MOTORS AMERICA, INC.
    Fig 2: Testing Hazard Lamp Relay
    G04863764Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals