LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2008 >> Rio Base, Automatic >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Keyless Entry And Burglar Alarm >> Inspection >> Burglar Horn

Burglar Horn

  1. Remove the burglar horn after removing 1 bolts and disconnect the 2P connector from the burglar horn.
  2. Test the burglar horn by connecting battery power to the terminal 1 and ground the terminal 2.
    Fig 1: Burglar Horn Connector
    G04863561Courtesy of KIA MOTORS AMERICA, INC.
  3. The burglar horn should make a sound. If the burglar horn fails to make a sound replace it.
scientia non olet · About LEMON Manuals