LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2007 >> Rondo L4-2.4L >> Repair and Diagnosis >> Transmission and Drivetrain >> Transmission Control Systems >> Actuators and Solenoids - Transmission and Drivetrain >> Actuators and Solenoids - A/T >> Shift Solenoid >> Testing and Inspection

Shift Solenoid: Testing and Inspection

SOLENOID VALVE

INSPECTION
1. If the value is out of specification according to the chart below, remove the valve body cover.





2. Measure the resistance again after disconnecting solenoid valve connector.

Specification (20°C): 2.5 - 3.5 Ohms (LR, 2ND, UD, OD, TCC)





3. If the value is out of specification replace the solenoid valve.




scientia non olet · About LEMON Manuals