LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2007 >> Rio Base, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Indicators And Gauges >> Instrument Cluster >> Inspection >> Engine Coolant Temperature Gauge (Hi Model)

Engine Coolant Temperature Gauge (Hi Model)

  1. Disconnect the wiring connector (A) from the engine coolant temperature sender in the engine compartment.
  2. Turn the ignition switch ON. Check that the gauge needle indicates cool. Turn the ignition switch OFF.
  3. Connect a 12V, 3.4 wattages test bulb between the harness side connector and ground.
  4. Turn the ignition switch ON.
  5. Verify that the test bulb flashes and that the indicator moves to HOT position.

    If operation is not as specified, replace the cluster. Then recheck the system.

    Fig 1: Connecting Test Bulb Between Harness Side Connector And Ground
    G04863625Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals