Instrument Cluster: Inspection: Speedometer
- Adjust the pressure of the tires to the specified level.
- Drive the vehicle onto a speedometer tester. Use wheel chocks (A) as appropriate.
- Check if the speedometer indicator range is within the standard values.CAUTION: Do not operate the clutch suddenly or increase/decrease speed rapidly while testing.NOTE: Tire wear and tire over or under inflation will increase the indication error.
[CANADA-KM/H]
VELOCITY AND TOLERANCE CHART
| Velocity (km/h) | 20 | 40 | 60 | 80 | 100 | 120 |
| Tolerance (km/h) | +1.8 -1.2 |
+3.0 -0.5 |
+4.5 +0.5 |
+6.0 +1.5 |
+7.0 +2.5 |
+7.5 +3.0 |
| Velocity (km/h) | 140 | 160 | 180 | 200 | 220 | 240 |
| Tolerance (km/h) | +9.0 +4.5 |
+10.0 +5.0 |
+11.0 +5.5 |
+12.0 +6.0 |
+13.0 +6.5 |
+13.0 +6.5 |
[USA - MPH]
VELOCITY AND TOLERANCE CHART
| Velocity (MPH) | 10 | 20 | 40 | 60 |
| Tolerance (MPH) | +2.5 +0.0 |
+3.0 +0.5 |
+4.0 +1.0 |
+4.0 +1.0 |
| Velocity (MPH) | 80 | 100 | 120 | 140 |
| Tolerance (MPH) | +5.0 +1.5 |
+5.5 +2.0 |
+6.0 +2.0 |
+7.0 +3.0 |