LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2004 >> Sedona EX >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Air Bag Restraint Systems) >> Diagnostics >> SRSCM Diagnostic Check

SRSCM Diagnostic Check

WARNING: This page is about a different car, the 2002 Kia Sedona. However, it is still accessible from the selected car via links, so may be relevant.
  1. Before proceeding, see AIR BAG SAFETY PRECAUTIONS . Disable air bag system. See DISABLING & ACTIVATING AIR BAG SYSTEM .
  2. Disconnect SRSCM connector. Remove driver-side air bag module. Disconnect passenger-side air bag module connector and seat belt pretensioner connectors.
  3. Install jumper wires on harness side of connectors for all disconnected SRS components. Connect SRSCM connector. Install scan tool to Data Link Connector (DLC), located under driver side instrument panel.
  4. Connect negative battery cable. Wait at least 30 seconds. Turn ignition on. Wait at least 30 seconds. Using scan tool, clear Diagnostic Trouble Codes (DTC's). Turn ignition off. Wait at least 30 seconds. Turn ignition on. Wait at least 30 seconds. Using scan tool, retrieve DTC's. If any DTC's are displayed, replace SRSCM. If no DTC's are displayed, SRSCM is okay at this time.
scientia non olet · About LEMON Manuals