DTC 58: Passenger Module Short To Battery

Before proceeding, see AIR BAG SAFETY PRECAUTIONS . Disable air bag system. See DISABLING & ACTIVATING AIR BAG SYSTEM . Disconnect Air Bag Control Unit (ACU) connector. Disconnect passenger-side air bag module connector. Measure voltage between ground and ACU connector terminals No. 13 (Green/Red wire) and/or No. 14 (Green/Yellow wire). See Figure. If battery voltage exists at either terminal, replace wire harness between ACU and passenger-side air bag module. If battery voltage does not exist, replace passenger-side air bag module. See PASSENGER-SIDE AIR BAG MODULE  under REMOVAL & INSTALLATION.