Clutch Cable: Removal

Loosen the cable adjuster nut at the transaxle release lever until the cable can be disengaged from the lever.
Remove the bolts attaching the cable routing bracket to the transaxle.
Remove the clip which is securing the cable case to the pedal support bracket.
Pull upward on the cable and disengage it from the hook on the pedal.

Fig 1: Removing Clutch Cable From Release Lever
Courtesy of KIA MOTORS AMERICA, INC.
If necessary, loosen the attaching nut and remove the routing bracket.
Remove the cable through the hole in the bulkhead.