Disc Plate

Measure thickness of disc plate.
Standard: 1.02 in (26 mm)

Minimum: 0.94 in (24 mm)

Fig 1: Measuring Thickness Of Disc Plate
Courtesy of KIA MOTORS AMERICA, INC.
Measure runout at 0.47-0.63 in (12-16 mm) inside from outer edge of contact surface of disc pad.
Runout: 0.002 in (0.05 mm) Max.
CAUTION:
- There must be no wheel bearing looseness.
- Measurement location is outer edge of disc plate surface.
Fig 2: Measuring Disc Plate Surface Runout
Courtesy of KIA MOTORS AMERICA, INC.