Flexible Hose: Installation

Place flexible hose in bracket and fix flexible hose with clip.

Fig 1: Installing Flexible Hose Into Bracket
Courtesy of KIA MOTORS AMERICA, INC.
Connect flexible hose to brake pipe and tighten flare nut with SST (OK130 430 019).
CAUTION:
- Verify that hose is not twisted.
- Verify that hose does not touch other parts when vehicle bounces or when steering wheel is turned fully right or left.
Tightening torque:

9-16 lb.ft (13-22 N.m, 1.3-2.2 kg.m)

Fig 2: Tightening Hose
Courtesy of KIA MOTORS AMERICA, INC.