Master Cylinder

Measure a clearance between a push rod of power brake booster and a master cylinder piston by using the SST (OK993 430 032).
Clearance: 0 in (0 mm)

Fig 1: Measuring Pushrod To Piston Clearance
Courtesy of KIA MOTORS AMERICA, INC.
If the clearance is out of the specification, a push rod will be turned to adjust the clearance.

Fig 2: Pushrod To Piston Clearance Specification
Courtesy of KIA MOTORS AMERICA, INC.

Fig 3: Measuring Pushrod To Piston Clearance
Courtesy of KIA MOTORS AMERICA, INC.