LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2001 >> Sephia LS, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Master Cylinder >> Installation

Master Cylinder: Installation

  1. If a new brake master cylinder is being installed, adjust master vacuum to master cylinder push rod.
  2. Position the master cylinder on the master vacuum and install two brake master cylinder nuts.
  3. Tighten two brake master cylinder nuts.

    Tightening torque: 7~12 lb.ft (9.8~16 N.m, 1.0~1.6 kg.m) 

  4. Connect two brake lines.
  5. Tighten brake line flare nuts to specification.

    Tightening torque: 9~16 lb.ft (13~22 N.m, 1.3~2.2 kg.m) 

  6. Connect brake fluid level switch connectors.
  7. Bleed brakes.
  8. Connect battery ground cable.
scientia non olet · About LEMON Manuals