LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2001 >> Sephia Base, Automatic >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Timing Belt >> 1.8L 4-Cylinder Engine >> Overhaul >> Cylinder Head >> Valve Seat

Valve Seat

NOTE: Valve seat replacement information is not available from manufacturer.
  1. Service valve guide as needed before servicing valve seat. Inspect valve seat for roughness, pitting, cracks and damage. Check valve seat angle and seat width.
  2. Measure seat contact width on valve, and ensure seat contact position should be in center of valve face. Service seat if angle and width are not within specification. See CYLINDER HEAD  table under ENGINE SPECIFICATIONS. Measure valve installed height after servicing valve seat.
scientia non olet · About LEMON Manuals