LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2001 >> Sephia Base, Automatic >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Front Disc Brake >> Inspection >> Disc Plate

Disc Plate

  1. Measure thickness of disc plate.

    Standard: 0.94 in (24 mm) 

    Minimum: 0.86 in (22 mm) 

    Fig 1: Measuring Disc Plate
    G01080194
  2. Measure runout at outermost edge of brake rotor.

    Runout: 0.004 in (0.08 mm) Max. 

    CAUTION:
    1. There must be no wheel bearing looseness.
    2. Measurement location is outer edge of disc plate surface.
    Fig 2: Measuring Rotor Runout
    G01080195
scientia non olet · About LEMON Manuals