LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2001 >> Sephia Base, Automatic >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Brake Pedal >> Adjustments >> Brake Pedal Height >> Adjustment

Brake Pedal Height: Adjustment

  1. Disconnect brake pedal switch connector.
  2. Loosen locknut B and rotate switch A until it does not contact pedal.
  3. Loosen locknut D and turn rod C to adjust height of the brake pedal. If necessary, further rotate switch A to prevent it from contacting pedal.
  4. Rotate brake pedal switch A in until plunger is completely compressed, then rotate it out about 1/2 turn. Tighten locknuts B and D.
  5. Reconnect brake pedal switch connector.
  6. Verify operation of stoplights.
    Fig 1: Verifying Operation Of Stoplights
    G01080188
scientia non olet · About LEMON Manuals