LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2001 >> Rio Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Hydraulic Brake System >> Power Brake Unit >> Installation

Power Brake Unit: Installation

NOTE: Lubricate the clevis pin with white lithium grease.

To install, reverse the removal procedure. Tighten the four brake booster mounting nuts.

Tightening torque: 18.6~25.5 N.m (1.9~2.6 kg/cm, 13.7~18.8 lb-ft) 

scientia non olet · About LEMON Manuals