LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2001 >> Rio Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Hydraulic Brake System >> Brake Pedal >> Pedal Assembly >> Installation

Pedal Assembly: Installation

  1. If necessary, install the brake pedal stop bumper, foot pad, and bushings.
  2. Position the brake pedal spacer and slide the pivot bolt through to hold it in position.
  3. Position the return spring on the brake pedal.
  4. Position the clutch pedal, if equipped, and slide the pivot bolt through to hold it in position.
  5. Install the clutch pedal spacer, if equipped.
  6. Install the pivot bolt attaching washers and nut.
  7. Install the brake pedal clevis pin and split pin.
  8. Connect the negative battery cable.
scientia non olet · About LEMON Manuals