Antenna Mount

REMOVAL

1. Remove antenna mast by unscrewing antenna mast from mount.
2. Remove bezel nut from antenna.




3. Disconnect antenna cable from antenna.
4. Remove one nut from antenna mount support.
5. Remove antenna mount from bottom.

INSTALLATION

1. Install antenna mount.

Tighten antenna mount support bolt to
70-104 lb-in (8-12 N.m, 80-120 kg-cm)

2. Connect antenna cable connector to antenna.
3. Install bezel nut.

Tighten bezel nut to
26-44 lb-in (3-5 N.m, 30-50 kg-cm)

4. Install antenna mast.

Tighten antenna mast to
17-26 lb-in (2-3 N.m, 20-30 kg-cm)