Rocker Arm & Valve Lash Adjuster: Installation

Install rocker arm assembly with notched side of rocker arm shaft toward timing belt. See Fig 1 or Fig 2 . Ensure rocker arms are against rocker arm shaft mounting bosses before tightening. Tighten rocker arm assembly retaining bolts in 2-3 steps, and to specification. See TORQUE SPECIFICATIONS . Remove lash adjuster holders. To complete installation, reverse removal procedure.

Fig 1: Installing Rocker Arm Shafts (1.5L)

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA

Fig 2: Installing Rocker Arm Shafts (1.8L)

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA