LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2000 >> Spectra GS, Standard >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Timing Belt >> 1.5 & 1.8L 4-Cylinder >> Removal & Installation >> Camshafts >> Installation (1.8L)

Installation (1.8L)

  1. Coat camshaft lobes and camshaft bearing journals with oil. Install camshaft into cylinder head. Tighten camshaft bearing cap bolts to specification. See TORQUE SPECIFICATIONS . Coat lip of NEW camshaft oil seal with oil. Install seal into cylinder head using Seal Driver (MD998713).
  2. Reassemble rocker arm assemblies, ensuring rocker arms are installed in original locations. Install lash adjuster holders. Install rocker arm assemblies. Remove lash adjuster holders. To complete installation, reverse removal procedure. Tighten all nuts and bolts to specification. See TORQUE SPECIFICATIONS .
scientia non olet · About LEMON Manuals