LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2000 >> Spectra GS L4-1.8L >> Repair and Diagnosis >> Powertrain Management >> Transmission Control Systems >> Actuators and Solenoids - Transmission and Drivetrain >> Actuators and Solenoids - A/T >> Throttle Valve Solenoid >> Testing and Inspection

Throttle Valve Solenoid: Testing and Inspection

RESISTANCE INSPECTION
1. Disconnect negative battery cable.
2. Disconnect solenoid valve connector.





3. Measure resistance between ground terminals and of connector C145.

Resistance: 4.1 - 5.1 ohms

4. If not correct, check wiring for an open or short circuit, replace pressure control valve.
5. Connect solenoid valve connector.
6. Connect negative battery cable.

scientia non olet · About LEMON Manuals