LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2025 >> Grand Cherokee Altitude, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 98 (Hybrid Control Processor Module (HCP) - DTCS P0C17-00 To P0C74-00) >> DTC Troubleshooting >> P0C17-00 Drive Motor A Position Sensor 1 Not Learned >> Possible Causes

Possible Causes

WARNING: This page is about a different car, the 2025 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
Possible Causes
RESOLVER POSITION RELEARN ROUTINE WAS NOT PERFORMED WITH THE SCAN TOOL
POWER INVERTER MODULE (PIM)

Always perform the PRE-DIAGNOSTIC TROUBLESHOOTING PROCEDURE before proceeding. Refer to  PRE-DIAGNOSTIC TROUBLESHOOTING PROCEDURE  . 

scientia non olet · About LEMON Manuals