PCV Valve
WARNING: This page is about a different car, the 2025 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
REMOVAL
- Remove the engine covers.
- Disconnect the quick connect fitting and remove the Positive Crankcase Ventilation (PCV) hose from the PCV valve.
1 - PCV Valve 1 - PCV Hose 2 - PCV Hose Quick-Connect Fitting - Using a pair of thin nosed pliers inserted into the approved zone on the PCV valve, rotate and remove the PCV valve.
1 - Approved Area in Green
INSTALLATION
Follow the removal procedure in reverse for general reassembly of the components on the vehicle. The steps listed below are calling out specific procedures that should be followed during installation.
- Lightly oil the O-Ring prior to installing the PCV Valve into the engine.