Possible Causes
WARNING: This page is about a different car, the 2025 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
| Possible Causes |
|---|
| PROXI/CONFIGURATION MISMATCH WAS DETECTED |
| USED CONTROLLER INSTALLED WITH WRONG CONFIGURATION |
| BCM NOT PROPERLY PROGRAMED OR WAS REPLACED AND NOT PROGRAMED |
| MODULE WAS ADDED OR SUBTRACTED WITHOUT CHANGING THE SALES CODE |
| POWERTRAIN CONTROL MODULE |
Always perform the PRE-DIAGNOSTIC TROUBLESHOOTING PROCEDURE before proceeding. Refer to: 2.0L - PRE-DIAGNOSTIC TROUBLESHOOTING PROCEDURE .