Default Action

WARNING: This page is about a different car, the 2025 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.

The MIL will illuminate.

Always perform the PRE-DIAGNOSTIC TROUBLESHOOTING PROCEDURE before proceeding. Refer to: 2.0L - PRE-DIAGNOSTIC TROUBLESHOOTING PROCEDURE .

The table below shows the FPCM DTCs and the correlating INTENDED failure modes. NOTE: On some vehicles the faults may not always set as expected which may lead to a misdiagnosis (Review the know issue module). Therefore, it is usually best to perform the "Complete Fuel Pump Control Module System Testing (Not DTC Specific)" in the diagnostic module.