LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2025 >> Grand Cherokee Altitude, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (2.0L - Engine (Service Information) (2 Of 4)) >> Cooling System >> Low Temperature Cooling System >> Standard Procedure >> Draining

Standard Procedure: Draining

WARNING: This page is about a different car, the 2025 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front belly pan. Refer to BELLY PAN, REMOVAL AND INSTALLATION .
  2. Remove the support and lower the vehicle.
  3. Remove the air cleaner body and clean air hose. Refer to BODY, AIR CLEANER, REMOVAL AND INSTALLATION .
  4. Position a drain pan under the coolant hoses.
  5. Disconnect the low temp coolant pump inlet hose and drain the low temp cooling system.
    GC0203148Courtesy of CHRYSLER GROUP, LLC
    1 - Low Temp Coolant Pump 2 Inlet Hose
    2 - Low Temp Coolant Pump 2 Outlet Hose
  6. Once the system is completely drained, connect the low temp coolant pump inlet hose.
scientia non olet · About LEMON Manuals