Transmission Mount: Notes
WARNING: This page is about a different car, the 2025 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
- Remove the transmission crossmember support. Refer to CROSSMEMBER, REMOVAL AND INSTALLATION .
- Remove the transmission mount to crossmember nuts.
1 - Transmission Mount to Transmission Crossmember Nuts - Using a suitable jack, raise the transmission off of the crossmember.
- Remove the transmission mount to transfer case bolts and the rear mount.
1 - Transmission Mount Bolts - Remove the transmission mount from the vehicle.
INSTALLATION
Follow the removal procedure in reverse for general reassembly of the components on the vehicle.