When Monitored
WARNING: This page is about a different car, the 2025 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
This diagnostic runs continuously when the following conditions are met:
- Ignition on.
- Temperature jump detected in chip 2 temperature.
- No failures detected in the engine speed signal, Input Speed Senor signal and chip 2 temperature sensor monitoring with the engine speed greater than 400 RPM for a calibrated amount of time.
- The input speed is greater than 400 RPM and the time that the engine speed or input speed is greater than or equal to five consecutive minutes.
- No failure detected in the chip 2 temperature sensor monitoring.