When Monitored

WARNING: This page is about a different car, the 2025 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.

This diagnostic runs continuously when the following conditions are met:

The ignition is on.
The measurement software switch is off.

The ignition is on.
There are no failures in the sensor supply voltage detected.

No rationality or electrical failures detected in the Output Speed Sensor.
No rationality or electrical failures detected in the Input Speed Sensor.
The input speed signal is valid.
The integrated approach element is not in a state of overpressure.
The transmission is in force flow position.
No BUS failure in engine speed is detected.