LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2025 >> Grand Cherokee Altitude, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (2.0L - Exhaust System) >> Shield, Heat >> Removal And Installation >> Front Heat Shield >> Notes

Front Heat Shield: Notes

WARNING: This page is about a different car, the 2025 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.

REMOVAL 

  1. Remove the exhaust pipe. Refer to PIPE, EXHAUST, REMOVAL AND INSTALLATION .
  2. Remove the center heat shield nut and position the center heat shield tab off the stud.
    GC0203158Courtesy of CHRYSLER GROUP, LLC
    1 - Center Heat Shield Tab
    2 - Center Heat Shield Nut
  3. Remove the front heat shield nuts and the front heat shield.
    GC0203319Courtesy of CHRYSLER GROUP, LLC
    1 - Front Heat Shield Nuts
    2 - Front Heat Shield

INSTALLATION 

Follow the removal procedure in reverse for general reassembly of the components on the vehicle.