LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2025 >> Grand Cherokee Altitude, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (2.0L - Engine (Service Information) (1 Of 4)) >> Technical Specifications >> Torque Specifications >> Torque Specifications - Cylinder Head

Torque Specifications - Cylinder Head

WARNING: This page is about a different car, the 2025 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
GC0206419Courtesy of CHRYSLER GROUP, LLC
TORQUE SPECIFICATIONS - CYLINDER HEAD

CALLOUT DESCRIPTION SPECIFICATION COMMENTS
1 Cylinder Head Cover M6 Bolts 10 N.m (89 In. Lbs.)  Tightening Sequence
GC0182665Courtesy of CHRYSLER GROUP, LLC
2 Cylinder Head M11 Inner Bolts
Cylinder Head M8 Side Bolt (11)		 Torque Procedure: 
  1. M11 bolts to 20 N.m (15 Ft. Lbs.) 
  2. M11 bolts to 55 N.m (41 Ft. Lbs.) 
  3. Tighten M11 bolts again to 55 N.m (41 Ft. Lbs.) 
  4. + 180° 
  5. M8 bolt to 28 N.m (21 Ft. Lbs.) 
 Tightening Sequence
GC0181426Courtesy of CHRYSLER GROUP, LLC
3 Camshaft Cap M6 Bolts 10 N.m (89 In. Lbs.)  Tightening Sequence
GC0182897Courtesy of CHRYSLER GROUP, LLC
scientia non olet · About LEMON Manuals