LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2025 >> Grand Cherokee Altitude, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (2.0L - Engine (Service Information) (1 Of 4)) >> Standard Procedure >> Drive Line Support Fixture

Drive Line Support Fixture

WARNING: This page is about a different car, the 2025 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the air cleaner body.
  2. Remove the left and right side radiator crossmember bolts.
  3. Assemble the WL Engine Support Kit [special tool # 8534C-17].
    GC0207118Courtesy of CHRYSLER GROUP, LLC
  4. Install the WL engine support kit on the left and right strut towers and radiator support.
  5. Secure the Driveline Support Fixture [special tool # 8534C] to the WL engine support kit using the U-bolts.
  6. Install the left and right side radiator support bolts to secure the fixture.
  7. Attach the lifting hook to the following locations:
    • 2.0L - Install suitable engine lifting brackets to the engine and position a load leveling lifting sling between the engine and an engine hoist.
    • 3.6L - Remove the throttle body, connect to the hole in the top of the front timing cover.
    • 5.7L - Remove the intake manifold, install and connect to the engine lifting fixture 8984C.
scientia non olet · About LEMON Manuals