Side Engine Cover
WARNING: This page is about a different car, the 2025 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
REMOVAL
- Remove the top engine cover.
- Remove the two side engine cover bolts and disengage the side engine cover from the two lower rubber mounting grommets.
1 - Side Engine Cover 2 - Side Engine Cover Bolts - Disengage the two transmission vent hose retainers from the side engine cover.
INSTALLATION
Follow the removal procedure in reverse for general reassembly of the components on the vehicle.
Do not reuse these fasteners. If removed, a NEW fastener must be installed and tightened to specifications.