Switch Bank Pod

REMOVAL 

1. Remove the instrument panel center bezel. Refer to BEZEL, INSTRUMENT PANEL, CENTER, REMOVAL AND INSTALLATION .
2. Remove the fasteners securing the switch bank pod to the center instrument panel bezel.

   Courtesy of CHRYSLER GROUP, LLC

   1 - Fasteners

   2 - Switch Bank Pod

   3 - Bezel

3. Remove the switch bank pod from the center instrument panel bezel.

   Courtesy of CHRYSLER GROUP, LLC

   1 - Switch Bank Pod

   2 - Bezel

INSTALLATION 

Follow the removal procedure in reverse for general reassembly of the components on the vehicle. The steps listed below are calling out specific procedures that should be followed during installation.

• All fasteners are tightened securely.
• Install the center instrument panel bezel. Refer to BEZEL, INSTRUMENT PANEL, CENTER, REMOVAL AND INSTALLATION .